Road Icing Sensor (Buried Type)
The main principle: the internal element of the icing sensor emits a wave; when the wave reaches ice, water or air, its propagation speed and vibration frequency change. On return, the sensor core element and internal algorithms distinguish the different media, and the time difference between emission and return yields the ice thickness, with an error down to 0.1mm.
Product Features
- The road icing sensor uses microwave perturbation technology, exploiting wave propagation characteristics and micro-electrode voltammetric characteristics for detection. It distinguishes ice, water and air by the time difference between wave emission and return and calculates the ice thickness. With high accuracy, it monitors road icing conditions in real time.
Application Scenarios
- Mainly used for ice monitoring on roads, bridges, airport runways and other transport infrastructure, providing data support for weather warnings and de-icing systems.
Technical parameters
| Detection parameters | icing, ice thickness, dry, water film, road surface temperature, water depth |
|---|---|
| Icing detection range | 0.5mm~15mm |
| Minimum ice thickness | 0.5mm |
| Maximum ice thickness | 50mm |
| Water film range | 0-50mm |
| Snow depth range | 0-50mm |
| Icing alarm thickness | 5-50 mm (adjustable) |
| Measurement Accuracy | ±1% FS |
| Communication | RS485(Modbus-RTU) |
| Operating temperature | -40℃~85℃ |
| Storage temperature | -55℃~85℃ |
| Supply voltage | 3.3VDC 或 5~30VDC |
| Operating humidity | 0~100%RH |
| Dimensions | Φ60×34mm |
| Protection Rating | IP67 |
Product Manual
Catalog
1. Introduction
Every year severe weather such as rain and snow causes numerous casualties, so timely access to road weather information is particularly important. Thickness measurement is a key part of any road icing sensor system and plays a central role, yet the domestic market is largely dominated by imported sensors and the measurement technology is likewise controlled by foreign suppliers. After years of research our company has broken this technological monopoly and developed an ice thickness sensor, establishing a working model for ice thickness measurement based on wave propagation characteristics and the volt-ampere characteristics of microelectrodes.
The principle is as follows: an element inside the icing sensor emits a wave whose transmission rate and vibration frequency change depending on whether it reaches ice, water or air. When the wave returns, the sensor's core element and an internal algorithm distinguish the different media, and the ice thickness is derived from the time difference between emission and return.
Signal detection technology is combined with a multi-parameter fusion algorithm covering thickness ratio and temperature. By detecting the wave return time and peak attenuation for different media on the sensing surface — road, ice, air and so on — and integrating temperature measurement and compensation, the device monitors icing and ice thickness.
The sensor is simple in structure, easy to install and highly immune to interference. It can be used for road icing monitoring on motorways, airports, bridges and urban roads, and is an important solution for IoT applications such as intelligent transport and smart cities. It also meets the need for automatic continuous monitoring of ice accretion thickness on power line towers, and for real-time continuous monitoring in harsh environments such as forests, outdoor structures, communication towers and offshore oil platforms.
1.1 Classification of icing sensor solutions
1.1.1 Buried (in-road) icing sensor:
The buried icing sensor is a contact-type sensor that senses whether the road is iced, wet or snow-covered through contact with its surface. Installation is relatively simple but requires drilling into the road surface.
1.1.2 Remote-sensing (non-contact) icing sensor:
The remote-sensing type is mounted on a monitoring pole beside the road, and its probe emits infrared light to measure ice thickness, although distinguishing ice, water and snow involves some error. It is a non-contact measurement method, but its price is 8-9 times that of the buried icing sensor.
2. Analysis of product technical parameters
2.1 Buried icing sensor
Detection parameters: icing, ice thickness, dry, water film, road surface temperature, water depth
Icing detection range: 0.5-15 mm
Minimum ice thickness: 0.5 mm
Maximum ice thickness: 50 mm
Water film range: 0-50 mm
Snow depth range: 0-50 mm
Icing alarm thickness: 0.5-50 mm (adjustable)
Accuracy: 1% FS
Communication: RS485 (Modbus RTU)
Operating temperature: -40℃~85℃
Storage temperature: -55℃~85℃
Supply voltage: 3.3 VDC or 5-30 VDC
Operating humidity: 0~100%RH
Dimensions: 60 × 34 mm
Protection rating: IP67
2.2 Remote-sensing icing sensor
Detection parameters: icing, ice thickness, dry, water film, road surface temperature, visibility, water depth
Icing detection range: 0.5-15 mm
Minimum ice thickness: 1.2 mm
Maximum ice thickness: 50 mm
Water film range: 5-50 mm
Minimum water film thickness: 5 mm
Snow depth measuring range: 1-50 mm
Accuracy: 5% FS
Operating temperature: -40℃~85℃
2.3 Overall comparison: because the buried type is in direct contact with the medium, it offers better accuracy and a smaller minimum measurable value, and it also distinguishes ice from water better than the remote-sensing type. However, the buried type does not measure visibility.
3. Application fields
Motorways, airports, bridges
Urban interchanges
Scenic-area roads
Mountain roads
Power lines, towers, outdoor equipment
Offshore drilling platforms, river and lake ice
Novel road de-icing systems
4. Installation
4.1 Installing the buried icing sensor:
Install it where icing may endanger safety. The sensing membrane of the probe must be in contact with the medium to be detected so that the probe freezes at the same time as the medium; only then does detection work.
During installation, first drill a hole slightly larger than the product diameter at the installation point as shown in Figure 3 and insert the sensor. Route the sensor cable out through the side conduit. As shown in Figure 4, fill the remaining gap around the hole to complete the installation.
4.2 Installing the remote-sensing icing sensor:
All-in-one installation: erect a mounting pole beside the road carrying the ice probe, snow probe, visibility probe and solar panel. Install it in the same way as a street light.
4.3 Buried icing sensor selection table
|
Model |
JS-J/E |
J (detects icing and ice thickness) E (detects icing, ice thickness and temperature) |
|
JS-F |
F (detects icing and ice thickness, with customised outputs for temperature, ice/water level and other data) |
|
|
Housing material |
304/316 stainless steel |
A |
|
PTFE anti-corrosion coating |
B |
|
|
Local display |
With |
X |
|
Without |
F |
|
|
Temperature |
Ambient (-20℃-100℃) |
C |
|
Custom |
D |
|
|
Output signal |
Digital (switching) |
K |
|
Analogue |
M |
|
|
Digital (serial) |
S |
|
|
Internal components |
Domestic |
G |
|
Internal components |
Imported |
W |
|
Mounting type |
Buried / surface-mounted / in-line / special |
|
|
Pressure |
User-supplied |
|
4.4 Remote-sensing icing sensor selection table
|
Model |
JS-YG
|
J (detects icing and ice thickness) E (detects icing, ice thickness and temperature) F (detects icing and ice thickness, with customised outputs for temperature, ice/water level and other data) |
|
Housing material |
304/316 stainless steel |
A |
|
PTFE anti-corrosion coating |
B |
|
|
Local display |
With |
X |
|
Without |
F |
|
|
Temperature |
Ambient (-40℃-70℃) |
C |
|
Custom |
D |
|
|
Internal components |
Domestic |
G |
|
Internal components |
Imported |
W |
|
Mounting type |
Pole-mounted |
U |
Document Download
结冰传感器说明书(地埋)
Click to download document
Need more information?
For any product inquiries or technical questions, please feel free to contact us at any time.
